Haier HWM200-B1678S Owner's Manual page 19

Trouble-shooting
If there is a fault or the machine dose not operate correctly,remove the power plug before
checking the machine.Using diagnostic list below,please check if the machine requires a
repair.If a repair is required,please contact our customer care team,do not try to fix it by
yourself.
Problem
The machine does not drain
or drain slowly.The display
shows E1.
The machine stops running
The display shows E2.
The machine does not drain
or drain slowly.The display
shows E3.
The display shows E4.
The display shows FA.
The machine
does not work.
There are abnormal
sounds inside the machine.
Possible causes
Is the drain hose blocked?
Is the drain pump
ineffective?
The top lid is not closed.
Has the laundry been placed
unevenly in the machine?
Is the machine level?
Is the water tap closed or
has the water supply been
interrupted?
Is the water inlet valve
blocked?
Is the water pressure too
low?
Is the drain house set too
low?
The water level sensor has
failed.
Is there a power failure?
Is the power plug inserted
Will not
tightly?
wash
Has the water level reached
preset position?
Is the power plug inserted
tightly?
Will not
Is the top lid closed?
spin
Is the laundry distributed
unevenly in the machine?
Is the machine level?
Has the laundry been placed
unevenly in the machine?
Are there any foreign objects
inside the bowl?
Remove the blockage.Push
the Start/Pause button once.
Contact Customer Care.
Close the top lid.Push the
Start/Pause button once.
Redistribute the load evenly.
Push the Start/Pause button
once.
Level the machine.
Open the water tap. Push
the Start/Pause button once.
Clean the water inlet valve
then push the Start/Pause
button once.
Use after the water pressure
is normal.
The height of the end of
the drain house should be
between 0.8m-1.2m.
Please contact Customer
Care.
Wait for the power supply
to be restored.
Insert the power plug tightly.
Wait for the water to fill to
the preset level
Insert the power plug tightly.
Close the top lid.
Redistribute the laundry.
Level the machine.
Redistribute the load evenly.
Close the top lid.
Remove the foreign object.
16
What to do