Advertisement
VIU–323 Quick Start Guide
Define the LAN Port
Figure 10 - LAN Port Settings screen
1. In the LAN Port Settings screen, make sure the Enabled check box is selected.
2. In the IP Address text box, the IP address is displayed automatically if you used a
terminal session to set this parameter (for information, see "Error! Cannot open file."
in Chapter 9, "Error! Cannot open file."); if the field is empty or the address
displayed is incorrect, type the correct address for this port.
3. In the IP Mask field, the subnet mask is displayed automatically if you used a terminal
session to set this parameter; if the field is empty or the address displayed is incorrect,
type the correct subnet mask (for information, see "Appendix C").
4. In the Description field, type a description of this LAN port.
5. Click Next. The Dialing Properties screen is displayed.
14
Advertisement
