Advertisement
VIU–323 Quick Start Guide
8 Assign an IP Address to the VIU–323
Figure 5- Select Unit screen
1. From the PC, click the Start button, and then point to Programs. Point to the
RADVision OnLAN Tools folder and then click OnLAN Configure 323. The Select
Unit screen is displayed and the Unit IP list box appears empty.
2. In the Unit IP text box, type the IP address you want to assign to the VIU-323. Click
Next.
3. The VIU-323 restarts and the Enter Password screen is displayed. Click Abort to exit
the configuration software. You can configure the VIU-323 parameters once you
connect the VIU-323 to the network.
4. Disconnect the PC from the VIU-323 and connect the PC to the LAN.
8
VIU–323's
IP address
Advertisement
