Verifying The Kit Contents; Preparing The Environment - National Instruments PXIe-5693 Getting Started Manual

Verifying the Kit Contents

1. NI 5693 RF Preselector Module
2. SMA Driver Bit, Part Number 190487A-01
3. Screwdriver, Part Number 772006-01
4. Plastic Cap (x4), Part Number 775067-01

Preparing the Environment

Ensure that the environment you are using the NI 5693 in meets the following specifications.
Operating ambient temperature ............................................................................
(IEC-60068-2-1, IEC-60068-2-2)
Operating relative humidity ............................................................................
(IEC-60068-2-56)
Maximum altitude ............................................................................
............................................................................ Pollution Degree
Indoor use only.
Caution
hardware is completely dry and free from contaminants before returning it to
service.
Refer to the NI PXIe-5693 Specifications at
Note
specifications.
1
5
Clean the hardware with a soft, nonmetallic brush. Make sure that the
2
6 7
5. Driver Software DVD
6. NI 5693 RF Preselector Module Getting Started
Guide (This Document)
7. Read Me First: Safety and Electromagnetic
Compatibility
8. Maintain Forced-Air Cooling Note to Users
0 °C to 55 °C
10% to 90%, noncondensing
2,000 m (800 mbar) (at 25 °C ambient
temperature)
2
NI PXIe-5693 Getting Started Guide | © National Instruments | 3
4
3
8
ni.com/manuals for complete