Steg
1. Använd en skruvmejsel och ta bort HDMI-modulskyddet från chassit.
OBS:
Det här steget gäller endast när HDMI-modulen installeras för första gången.
2. Anslut HDMI-modulens kabel till kontakten (VIDEO) på moderkortet.
3. Sätt in HDMI-modulen i platsen på chassit.
4. Sätt tillbaka de två (M3x3) skruvarna för att sätta fast HDMI-modulen i chassit.
Nästa Steg
1. Installera sidopanelen.
2. Följ anvisningarna i
När du har arbetat inuti
Moderkort
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5-inch hard drive
5. Remove the
3.5-inch hard drive
94
Ta bort och installera enheter som kan bytas ute i fält (FRU:er)
datorn.
Before working inside your
if applicable.
if applicable.
computer.
Need help?
Do you have a question about the OptiPlex Small Form Factor 7010 and is the answer not in the manual?
Questions and answers