About this task
The following image indicates the location of the optical drive and provides a visual representation of the installation procedure.
Steps
1. Slide the optical drive into the disk-drive cage until it snaps into place.
2. Install the single (M2x2) screw to secure the optical drive from the disk-drive cage.
Next steps
1. Install the
3.5-inch hard drive
2. Install the
2.5-inch hard drive
3. Install the
disk-drive
cage.
4. Install the
front
bezel.
5. Install the
side
cover.
6. Follow the procedure in
if applicable.
if applicable.
After working inside your
Ta bort och installera enheter som kan bytas av kund (CRU:er)
computer.
53
Need help?
Do you have a question about the OptiPlex Small Form Factor 7010 and is the answer not in the manual?
Questions and answers