Table of Contents
Advertisement
Quick Links
Electrolux Outdoor Products
Via Como 72
23868 Valmadrera (Lecco)
Phone + 39 0341 203111 - Fax +39 0341 581671
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Electrolux Outdoor Products manufacture products for a number of well known brands under various registered patents, designs and
trademarks in several countries.
© Electrolux Outdoor Products
The Electrolux Group. The world's No.1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million
Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are
sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.
PN. 249351 REV. 01 (04/04)
Valmadrera, 15.12.01
ITALIA
Pino Todero (Direttore Tecnico)
E.O.P.I.
P411 CCS
P462 CCS
P511 CCS
Advertisement
Table of Contents
Related Manuals for Electrolux P462 CCS
Summary of Contents for Electrolux P462 CCS
- Page 1 The Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
-
Page 4: General Description
A. General description CYLINDER LID 14. GUIDE BAR FRONT HANDLE 15. SPIKED BUMPER FRONT HAND GUARD 16. CHAIN CATCHER RECOIL STARTER 17. CLUTCH COVER CHAIN OIL TANK 18. TRIGGER STARTER HANDLE 19. THROTTLE TRIGGER LOCKOUT REGULATION SCREWS, CARBURETTOR 20. CHAIN TENSIONER SCREW ENRICHER/CHOKE 21. -
Page 5: Safety Precautions
Safety precautions CAUTION! Use this unit properly in order to avoid injuries. Follow the instructions and precautions for reasonably safe, efficient use of the product. It is the responsibility of the user to follow the instructions and precautions provided in the manual supplied with the product. Note the illustrations at the beginning of the manual. -
Page 6: General Safety Rules
B. General safety rules WARNING! The saw is intended only for the cutting of wood The engine group is intended only for use with the recommended cutting equip- ment. WARNING! The saw can be dangerous. Improper use can cause injuries or even fatalities to the user or others. -
Page 7: Safety Devices
C. Safety devices WARNING! Never use the saw if the safety devices are defective or damaged. Follow the instructions for checks, maintenance and service. Your saw is equipped with the following security devices: The KICKBACK can be produced if the end part of the bar makes solid contact with the wood or other object. -
Page 8: Bar And Chain Assembly
Chain”) Always execute correct maintenance for the bar and C5. LESSENING VIBRATIONS chain (see chapter “Maintenance”). The saw is equipped with a vibration damping system that develops during the use of the saw. ATTENTION! Never use the saw without the The antiquiver system reduces vibration propagation chain catcher. -
Page 9: Starting And Stopping
without the specifications expressedly shown tion to the risk of fire especially in the presence in this manual, can cause serious damage to flammable gasses or materials. the engine! Always check that there are no fuel losses. 2. Prepare the mixture in a clean can, homologated for the petrol. - Page 10 COLD ENGINE STARTING Let the engine heat up for not less than 10 seconds, warming the machine up allows for better cutting ATTENTION! During starting, give maximum performance. attention to the movement of the chain. If the saw doesn’t start, closely repeat all of the operations. To avoid difficulty starting, it’s strongly suggested you ATTENTION! avoid the exhaustion of the fuel mixture in the tank;...
- Page 11 USE OF THE SAW G7. Disbranching before cutting and withdrawal path The following list is a theoretical disquisition regarding the For disbranching operations the same principles apply as most common situations one using the saw must face. they do for normal cutting. 1.
- Page 12 For the pulling down of a tree we recommend using a bar G10. DISBRANCHING longer than the diameter of the trunk, so as to be able execute ATTENTION! Most accidents caused by saw the DIRECTIONAL and FALLING cuts with a SIMPLE CUT KICKBACK happen during the disbranching (see “technical characteristics”...
-
Page 13: Periodic Maintenance
I. Maintenance of safety devices ATTENTION! Closely follow the maintenance instructions shown in this manual. During maintenance operations the saw must be turned off. Start the motor only when a procedure requires it and it follows safety norms. ATTENTION! Do maintenance checks to safety devices before using the saw. If the saw doesn’t pass one of the checks shown here do not use it under any circumstances. - Page 14 The operation will be easier using the file guide. uniform performance in the event the guide groove is worn or During sharpening the file must be positioned so as there are excessive furrows present. Clean the chain guide. determine the following three corners of the cutting: Grease the bar coil with fat for bearings.
-
Page 15: Technical Data
Technical data 411 CCS 462 CCS 511 CCS Engine Cubic capacity cm 40,2 44,3 48,7 Bore (mm) Stroke(mm) Revolutions per minute (min-1) 2500 2500 2500 Recommended maximum revolutions (min-1) 12500 12500 12500 Power (kW/min-1) 2,0/9000 2,2/9000 2,3/9000 Ignition Make/type of the ignition Phelon/CD Plug Champion RCJ7Y...