Before You Begin; Tools And Parts Needed; Parts Included; Removing Packaging - Bosch HDS8645U Installation Instructions Manual

2 Before you begin

Before you begin

Before you begin
2.1 Tools and parts needed
¡ Phillips head screwdriver
¡ Slotted screwdriver 1/8" (3,5 mm)
¡ Adjustable wrench
¡ Tongue and groove pliers
¡ Socket or flat wrench 3/8" (10 mm) or tongs
¡ Socket or flat wrench 7/8" (22 mm) or tongs
¡ Drill with 5/16" (8 mm) bit
¡ Pencil
¡ Tape measure
¡ Teflon tape or pipe-joint compound
Only needed for appliances without power cord:
¡ Tube hexagonal wrench with nut head 3/8" (10 mm)
¡ Tube hexagonal wrench with nut head 5/16" (8 mm)
¡ Power Supply Cord (only for USA)
Note: Additional materials may be necessary for installa-
tion in solid surface countertops. Contact the countertop
manufacturer.
2.2 Parts included
30" Range:
36" Range:
2.3 Removing packaging
See the diagram on the packaging.
If straps are present, cut the straps.
1.
Cut the plastic down the back of unit making sure not to
2.
cut the unit.
Remove the plastic film.
3.
Lift the cardboard carton from the top of the range and
4.
dispose of it.
Remove the corner posts, making sure that any other
5.
packaging materials running between the corner posts
are also removed.
Remove all internal packaging and tape.
6.
The rear vent trim is nested in the styrofoam packaging
7.
for shipping purposes. Do not throw it away.
Before you begin en-us
9