Flow Control Management (Qos); Lorawan Network Setup; Lorawan Band Settings - Ebyte E890-470LG12 User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

4.4.9.Flow control management (Qos)

In the Network -> Qos option, you can sort traffic packets according to network address, port or service, and apply

network speed limits for a particular interface, among other functions. This is shown in the diagram below.

In the LoRaWAN network settings section, users can set and query the LoRaWAN frequency band, LoRaWAN

gateway related parameters, and view the current status information. For example, the number of received and

transmitted messages, current channel usage, RSSI & SNR, upstream and downstream packet time and airtime. Some of

the common user settings options are described below.

The LoRaWAN band settings are divided into band areas and band settings.

Band Region refers to the Regional Parameter specified in the LoRaWAN protocol,

EU868/IN865/US915/AU915/AS923/KR920/CN470/EU433, currently only CN470 is supported, more regions will be

opened later.

The frequency band can be set to 12 bands from 0 to 11, each band corresponding to the upstream and downstream

frequencies as shown in the figure below.

4-25

E890-470LG12 User Manual

Table of Contents