Switches; Dhcp/Dns - Ebyte E890-470LG12 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

4.4.3. Switches

In the Network -> Switch option, users can combine Network -> Interface to set the type of network port (such as
LAN port or WAN port) or network port enable/disable, in the later version, it will be combined with load balancing to
do related settings, the setting interface is shown in the figure below.

4.4.4.DHCP/DNS

In the Network->DHCP/DNS option, use MAC-Address to identify the host, IPv4-Address to assign an address,
and Hostname to assign a logo. Static address assignment: set at "Network->DHCP/DNS-> Basic Settings". This function
is an extension of the DHCP settings for the LAN interface and is used to assign fixed IP addresses and host identifiers to
DHC clients. Only the assigned hosts can connect and the interface must be non-dynamically configured.
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
4-19
E890-470LG12 User Manual