Table of Contents
Advertisement
23
INLINE SERVICE VALVES
Inline service valves (not supplied with this product) MUST be fitted to permit future maintenance of
the cartridges. They also facilitate the cold water isolation test.
These should be fitted as close as is practicable to the water supply inlets of the thermostatic shower
valve. Service valves should be installed in an easily accessible location.
Basic valve with isolating
only feature is available un-
der spares code S9005AA.
15mm compression fittings
at both ends & plated finish.
24
CLEANING CHROME SURFACES
When cleaning chromed products use only a mild detergent, rinse & wipe dry with
a soft cloth. Ideally clean after each use to maintain appearance.
Never use abrasive, scouring powders or scrapers. Never use cleaning agents
containing alcohol, ammonia, hydrochloric acid, sulphuric acid, nitric acid,
phosphoric acid or organic solvents. Use of incorrect cleaning products / methods may result in chrome
damage which is not covered by the manufacturer's guarantee.
E960086NU. Brass valve
with isolating & filter only
features. 15mm com-
pression fittings at both
ends. Supplied in pairs.
35
Spares code E960613NU contains
a pair of combined service valves.
Include a flow regulator, check valve,
strainer mesh (filter) & isolating
valve. The flow regulator and check
valve can be removed if not required.
Advertisement
Table of Contents
