Table of Contents
Advertisement
8
OPERATING PRODUCT
8.1
NOTE: the functionality of the temperature control handle is the
same for all the products in the T50 range. The functionality
of the flow control handle is the same for all products except
A7225AA & A7227AA, which have integral flow control & diverter
for dual shower outlets.
ATTENTION: TEMPERATURES HIGHER THAN
40°C CAN BE HARMFUL TO YOUR HEALTH.
Right handle controls water flow rate (for diverter, see next page):
• This handle is shown above parked in the off position (giving no flow at this position).
• Rotating this handle downwards from the parked position commences water flow. By rotating the
handle 90° from the off position the user will encounter economy flow "stop" delivering about 50% of
the maximum flow rate achievable through this product.
• To obtain greater flow rate, press (& hold) the right button & rotate this handle further downwards.
The handle will rotate a further 45° from the economy stop to the maximum flow.
• In this case, water will be discharged to the shower handset.
Left handle controls water temperature
• This handle is shown above parked in the 40°C temperature "stop" position.
• At this temperature "stop" position mixed water is delivered up-to about 40°C.
• To obtain cooler water rotate handle downwards from the parked position.
• To obtain higher water temperature, press the left handle pin (& hold) & then rotate this handle upwards
from the parked position.
REMEMBER, BE CAREFUL: TEMPERATURES HIGHER THAN 40°C CAN BE HARMFUL.
DO NOT FORCE HANDLES BEYOND THE DESCRIBED MOVEMENT RANGE OTHERWISE THIS
MAY RESULT IN DAMAGE TO BOTH VALVES AND HANDLES.
A7216AA & A7221AA
+
Shower mixer
handle flow
control positions
(Q= flow rate)
19
+
Q=0%
Q=50%
Q=100%
Advertisement
Table of Contents
