Table of Contents
Advertisement
9
TEMPERATURE ADJUSTMENT
If the mixer is not discharching 40°C water when the temperature handle is parked & aligned with the
body, then (if desired) this can be adjusted as follows:
40°C
2
1
5
1-2. First remove the temperature control handle (left side) as detailed in section 16, steps 1 to 3.
3.
Before sliding the handle off, ensure the dot on the handle is inline with the 40 marker on the mixer.
4.
Slide the handle off the spindle.
5.
Slide off the plastic bush from the drive spindle.
6.
Turn on the mixer, position a thermometer in the running water. When the temperature settles,
rotate the drive spindle of the thermostat until 40°C is achieved.
Without disturbing the drive spindle position, refit the bush & handle. Ensure dot is aligned to the 40
marker.
1
T
6
4
6
40°C
21
3
Advertisement
Table of Contents
