Camera Introduction; Set Up The Camera - Reolink Argus Eco Operational Instruction

Camera Introduction

Built-in Mic
Status LED
Lens
Daylight Sensor
Built-in PIR Sensor
Reset Hole
*Press the reset button with a
pin to restore camera to factory settings.
Power Switch
Micro SD Card Slot
*Always keep the rubber plug closed firmly.
Speaker
Antenna
Micro USB Port
Battery Status LED
Different states of the status LED:
Red Light: WiFi connection failed
Blue Light: WiFi connection succeeded
3 English
Blinking: Standby status
On: Working status

Set up the Camera

Download and launch the Reolink App or Client software, and follow the onscreen instructions
to finish initial setup.
• On Smartphone
Scan to download the Reolink App.
• On PC
Download path of the Reolink Client: Go to https://reolink.com > Support > App & Client.
English 4