Camera Introduction; Install Rechargeable Battery - Reolink Argus 2 Operational Instruction

Camera Introduction

Micro SD Card Slot
* SD card is not included.
Reset Hole
* Press the reset button with a
pin to restore factory settings.
Daylight Sensor
Lens
Status LED
Built-in Mic
Built-in PIR Motion Sensor
Speaker
Wall Mount
* Only for Argus 2
Different states of the status LED:
Red Light: WiFi connection failed
Blue Light: WiFi connection succeeded
3 English
Blinking: Standby status
On: Working status

Install Rechargeable Battery

Slide the battery downward and lock it firmly. Check the button status to see if
the battery is installed correctly.
To remove the battery from the camera,
please pull the button on the top of the
battery and slide it upwards.
English 4