Administrator Guide - SoundPoint
Local
3.6.3 ACD login / logout
The phone allows ACD (Automatic Call Distribution) login and logout. This feature
depends on support from a SIP server.
Central
(boot
server)
52
®
®
IP / SoundStation
IP
Web Server
Specify the local SIP signaling port and an array of SIP serv-
(if enabled)
ers to register to.
Navigate to: http://<phoneIPAddress>/appConf.htm
For up to six registrations, specify a display name, a SIP
address, an optional display label, an authentication user ID
and password, and an optional array of registration servers.
The authentication user ID and password are optional and
for security reasons can be omitted from the configuration
files. The local flash parameters will be used instead. The
optional array of servers will override the servers specified
in sip.cfg in non-Null. This will also override the servers on
the appConf.htm web page.
Navigate to: http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will perma-
nently override global settings unless deleted via the Reset
User Settings menu selection.
Local Phone User
Use the SIP Configuration menu to specify the local SIP sig-
Interface
naling port, an array of SIP servers to register to and regis-
tration information for up to six registrations. The SIP
Configuration menu contains a sub-set of all the parameters
available in the configuration files.
Either the Web Server or the boot server configuration files
or the local phone user interface should be used to configure
registrations, not a mixture of these options. When the SIP
Configuration menu is used, it is assumed that all registra-
tions use the same server.
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will per-
manently override global settings unless deleted via the
Reset User Settings menu selection.
•
Configuration file:
Turn this feature on or off.
ipmid.cfg
•
Copyright © 2004 Polycom, Inc.
For more information on the fields in this menu, see
4.6.2.1.1 Local <local/> on page 113, 4.6.2.1.2 Server
<server/> on page 114 and 4.6.3.1 Registration <reg/>
on page 121.
For more information, see 4.6.1.21 Feature <feature/>
on page 109.
Features
Need help?
Do you have a question about the SoundPoint IP 300 and is the answer not in the manual?