3 Replacement, Mechanical Parts
3.1
Front cover
3.1.1 Process tools
•
Torque screwdriver, torx no.7 pre-set to 15 Ncm.
•
Torque screwdriver, torx no.7 pre-set to 55 Ncm.
3.1.2 Instructions
•
Dismount the phone as described in 1 Disassembly, step 1-4.
1. Take a new front cover
2. Mount the side snap dome connectors (fig 1).
3. Mount the microphone and microphone boot (fig 2).
4. Remove the protection tape from the inside of the window
•
Mount the phone as described in 2 Reassemble, step 6-10.
3/00021-1/FEA209 544/18 F
Fig 1
Mechanical Working Instructions
Fig 2
7(21)