Mechanical Oven Control Panel - Revolution 227848 Manual

falls to the bottom of the oven.
Furthermore, good vapour cooking required preheating the oven to the desired temperature before activating
the vapour supply.
PREHEATING
To avoid the effects of heat loss when the oven door is opened to place food inside it is advised to preheat to at
least 30 °C higher than the desired cooking temperature.

7. MECHANICAL OVEN CONTROL PANEL

Only models REVOLUTION: 227824 and 227848
L1 K1
K1
K4
L1
B2
- TIMER SELECTOR
When manual is selected, the oven stays on until someone turns it off.When a certain value is selected,
the oven stays on for that time (2H = 120 minutes maximum).
- THERMOSTAT SELECTOR
This knob allows selecting the desired cooking temperature.
- THERMOSTAT LIGHT
This light is on when the oven heating elements are on therefore the temperature in the cooking chamber
is less than that set by the thermostat dial. When the light goes off it means that the heat is off and that the
cooking chamber has reached the set temperature.
- STEAM SELECTOR (227824 ONLY)
This button enables humidifying for the length of time it stays pressed.
K4 B2
Thermostat knob
Timer knob
Thermostat light
Steam selector (only 227824)
EN
17