Extraordinary Maintenance - Revolution 227848 Manual

• To clean the cooking compartment use soapy warm water. Subsequently, all surfaces must be thoroughly
rinsed, being careful to ensure no detergent residues remain.
• To clean the oven external parts, use a damp cloth and a non-aggressive detergent.
• Clean with hot water and soap then rinse.
It is strictly forbidden to wash the cooking chamber in cooking temperatures higher than 70°C, scalding
danger.
Daily cleaning of the oven cooking chamber lining must be carried out with a non-abrasive detergent to
guarantee its full function.
Use plastic bristles or a sponge soave in vinegar and warm water in case of dirt crusts.
Warning: residue fats possibly present in the cooking chamber could catch fire when using the oven, hence it
is advisable to remove them quickly.
Only use products recommended by the manufacturer of the appliance.
EXTERNAL CLEANING
Only use a damp cloth with warm water or products suitable for cleaning stainless steel. Do not use acidic
products or ammonia.
WARNING: the appliance should never be cleaned with high pressure water sprays.
REPLACING LIGHT LAMPS
WARNING: Strictly adhere to the following procedure in order to avoid electrocution or damage to people:
• Disconnect the electrical connection of the oven and leave it to cool.
EN
• take off the side grids that hold the baking trays.
• Unscrew the glass cover "A" while observing "C". Replace
the lamp "B" with one having the same characteristics.
• Screw back on glass cover "A" while observing washer "C".
• Put the side grids back on ensuring they are well fitted.
Should the glass lid be broken or damaged, do not use the
oven until the lid is replaced (Contact the Assistence Cen-
tre).

4. EXTRAORDINARY MAINTENANCE

It is advisable to have the appliance subjected to periodical checks (at least once per year) by a specialized
authorized technician.
Any maintenance, installation or repair work must be carried out by qualified authorized personnel by con-
tacting the Assistance Centre. Before carrying out any operation the appliance must be plugged out at the
mains, turn off the water mains taps and wait for it to cool down.
Before moving the appliance from position, check that the electricity and water connections (electric cables
water pipe) are correctly plugged out.
If the appliance is on wheels check that electric cables, pipes or anything else are not damaged while moving
it. Ensure the break is on. Avoid placing the device near heat (such as fryers etc.).
After carrying out the task and replacing the appliance in its initial position, check that the electric and water
are connected correctly.
14