Advertisement
Available languages
Available languages
The upper part of hotplates is covered by a protective material resistant to heat. Turn the
switch of the electrical cooker to "3" and then operate the cooker for 5 minutes in order to
burn and so to toughen the protective layer at first use.
During use of electrical cookers, it is required to pay attention to the used saucepans to have
smooth bases. If appropriate sized and smooth based saucepans are used, you can get the
most efficiency from your cooker. It is not suggested to use the little size saucepans on the
big size cooker, because this will cause heat loss and so energy will be wasted.
RIGHT
Surely control that your cooker is off, the control switch is at "0" location after cooking.
Also never touch it as the cooker will be hot for a spesific time after it was turned off.
Do not let children to come close to it.
Clean the electrical cooker with a wet cloth after using the electrical cooker. If there is
excessively getting dirty situation, you can clean it with water with detergent rather well.
Heat for a few minutes for the upper part to dry after cleaning.
If you will not use its upper part for a while, ensure to occur a thin oil layer as oiling with
machine oil.
4. 3 Use of Oven Function Switches
Oven Function Control Knob:
To select the desired cooking function, turn the knob to the related symbol. The details of the oven
functions have been explained in next part.
Oven Thermostat Knob:
After cooking function set, desired temperature can be adjusted by oven thermostat knob and
oven start to operate (timer must be adjusted, if available).
Thermostat signal light will be on or off according to thermostat operation.
WRONG
c i rcu l ar saucepan b ase
WRONG
small saucepan diameter
WRONG
saucepan's base had not settled
Advertisement
