Table of Contents
Advertisement
Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Place the power-adapter port into the slot on the palm-rest assembly.
2
Route the power-adapter port cable through its routing guides on the palm-rest
assembly.
3
Replace the screw (M2x3) that secures the power-adapter port to the palm-
rest assembly.
4
Connect the power-adapter port cable to the system board.
Post-requisites
1
Replace the
display
2
Replace the
battery (half-length)
3
Replace the
base
computer. After working inside your computer, follow
After working inside your
assembly.
or the
cover.
computer. For more safety best
battery
(full-length).
Before
www.dell.com/
81
Advertisement
Table of Contents
