Replacing the battery (half-
length)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the battery with the screw holes on the palm-rest
assembly.
2
Replace the four screws (M2x4) that secure the battery to the palm-rest
assembly.
3
Connect the battery cable to the system board.
Post-requisites
Replace the
base
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
21