Table of Contents
Advertisement
Removing the audio daughter-
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the
battery (half-length)
3
Remove the
wireless
4
Remove the
hard
5
Remove the
solid-state drive (half-length)
6
Remove the fans.
7
Remove the
heat-sink
8
Remove the
memory
9
Remove the
system
Procedure
1
Remove the two screws (M2x3) that secures the audio daughter-board to the
system board.
64
computer. After working inside your computer, follow
After working inside your
cover.
or the
card.
drive.
assembly.
modules.
board.
computer. For more safety best
battery
(full-length).
or the
solid-state drive
Before
www.dell.com/
(full-length).
Advertisement
Table of Contents
