Removing the solid-state drive
(full-length)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the
battery (half-length)
Procedure
1
Remove the screw (M2x3) that secures the solid-state drive to the system
board.
computer. After working inside your computer, follow
After working inside your
cover.
or the
computer. For more safety best
battery
(full-length).
Before
www.dell.com/
35