Replacing The Display Assembly; Procedure; Post-Requisites - Dell XPS 15 9560 Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Place the palm-rest assembly at the edge of the table with the speakers facing
away from the edge.
2 Align the screw holes on the palm-rest assembly with the screw holes on the
display hinges.
3 Replace the six screws (M2.5x5) that secure the display hinges to the palm-rest
assembly.
4 Adhere the tape and route the touch-screen cable (optional) through the routing
guides on the fan.
5 Connect the touch-screen cable and display cable to the system board.
NOTE: The touch-screen cable is available only on laptop
configurations with touch displays.
6 Replace the screw (M2x2) that secures the display-cable bracket to the system
board.

Post-requisites

1 Replace the wireless
2 Replace the battery (half-length)
3 Replace the base
78
computer. After working inside your computer, follow
After working inside your
card.
or the
cover.
computer. For more safety best
battery (full-length).
Before
www.dell.com/