2. Setting up the monitor
2.1 Installation
Package contents
1
* Earphone-Hang
*HDMI
*Different according to region
Note
Use only AC/DC adapter model: Philips
ADPC2090�
Quick start
27M1N5500Z
27M1N5500ZA
Register your product and get support at www.philips.com/welcome
AC/DC Adapter
*DP
* USB A-B
Install the base
2
1� Place the monitor face down on a
smooth surface� Pay attention not to
scratch or damage the screen�
2� Hold the stand with both hands�
(1) Gently attach the base to the
stand�
(2) Use your fingers to tighten the
screw located at the bottom of the
base�
(3) Use a screwdriver to tighten the
screw located at the bottom of the
base, and secure the base to the
stand tightly�
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand�
Caution
Place the monitor face down on a smooth
surface� Pay attention not to scrath or
damage the screen�
5