Subscribe to Our Youtube Channel
Related Manuals for Philips EVNIA 27M1N5200P
Summary of Contents for Philips EVNIA 27M1N5200P
- Page 1 27M1N5200P 27M1N5200PA User manual Customer care and warranty Troubleshooting and FAQs Register your product and get support at www.philips.com/welcome...
-
Page 2: Table Of Contents
6 HDR 17 7. Technical Specifications 18 7.1 Resolution & Preset Modes ..21 8 Power Management 22 9. Customer care and warranty 23 9.1 Philips’ Flat Panel Monitors Pixel Defect Policy ........ 23 9.2 Customer Care & Warranty ..26 10. Troubleshooting & FAQs 27 10.1Troubleshooting ......27... -
Page 3: Important
Keep the display away from oil. Oil may damage the plastic cover of the display and void the warranty. This electronic user’s guide is intended for anyone who uses the Philips monitor. • Remove any object that could fall Take time to read this user manual into ventilation holes or prevent before you use your monitor. - Page 4 bezel, ensure that the monitor does monitor by placing your hand or not tilt downward by more than -5 fingers on the LCD panel. degrees. If the -5 degree downward • Oil-based cleaning solutions may tilt angle maximum is exceeded, the damage the plastic parts and void the monitor damage will not be covered warranty.
-
Page 5: Notational Descriptions
1.2 Notational Descriptions activate a periodic screen refresh application if your monitor will The following subsections describe display unchanging static content. notational conventions used in this Uninterrupted display of still or static document. images over an extended period may cause “burn-in”, also known as “after- Notes, Cautions and Warnings imaging”... -
Page 6: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily This marking on the product or on entails participation in national take- its packaging illustrates that, under... -
Page 7: Setting Up The Monitor
(1) Gently attach the base to the 27M1N5200P 27M1N5200PA stand. Register your product and get support at www.philips.com/welcome (2) Use your fingers to tighten the screw located at the bottom of the base. (3) Use a screwdriver to tighten the... - Page 8 Connecting to your PC Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug 1 2 3 4 5 6 7 8 9 10 its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer.
-
Page 9: Operating The Monitor
2.2 Operating the monitor USB charging This display has USB ports capable of Description of the control buttons standard power output including some with USB Charging function (identifiable with power icon ). You can use these ports to charge your Smart phone or power your external HDD, for example. - Page 10 0~20 On-Screen Display (OSD) is a feature Crosshair On, O Low Input Lag On, O in all Philips LCD monitors. It allows an SmartResponse O , Fast , Faster, Fastest end user to adjust screen performance On, O SmartFrame Size (1, 2, 3, 4, 5, 6, 7)
- Page 11 It is recommended -5° to turn off when you are not using the gaming function. • This Philips monitor is certified with AMD FreeSync™ Premium / NVIDIA® G-SYNC® Compatible. The technol- ogy is used to match the refresh rate of the monitor to the graphic cards.
-
Page 12: Remove The Base Assembly For Vesa Mounting
2.3 Remove the Base Assembly Height adjustment for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on a smooth surface. Pay attention not to 130mm scratch or damage the screen. - Page 13 0° 90° -5° * Display design may differ from those illustrated. Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees. • Do not press the screen while adjusting the angle of the monitor.
-
Page 14: Image Optimization 12
EasyRead, SmartUniformity and Off. brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance. Why do I need it? ... - Page 15 • HDR Movie: Ideal setting for phenomenon among LCD displays. watching HDR movie. Deliver better Typical uniformity is measured contrast and brightness for more around 75-80%. By enabling Philips realistic and immerse viewing SmartUniformity feature, display experience. uniformity is increased to above 95%.
-
Page 16: Smartcontrast
3.2 SmartContrast What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a Monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. -
Page 17: Amd Freesync
4. AMD FreeSync AMD Radeon R9 290 • AMD Radeon R9 285 • Premium AMD Radeon R7 260X • AMD Radeon R7 260 • ■ Processor A-Series Desktop and Mobility APUs AMD A10-7890K • AMD A10-7870K • PC gaming has long been an imperfect AMD A10-7850K •... -
Page 18: Nvidia® G-Sync
Note • For best output performance, please always ensure that your graphic card is capable of achieving the maximum resolution and refresh rate of this Philips display. • NVIDIA® G-SYNC® support interface: DisplayPort. • Make sure your graphic card supports NVIDIA®... -
Page 19: Hdr 17
6. HDR HDR Settings in Windows10 system. Steps 1. Right click on the desktop, enter to Display settings. 2. Select the display/monitor. STEP 5 3. Adjust resolution to 1920 x 1080 Turn the “HDR and WCG” to on mode. 4. Adjust Brightness for SDR content. Note Windows10 edition is required;... -
Page 20: Technical Specifications 18
7. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight W-LED Panel Size 27" W (68.5 cm) Aspect Ratio 16:9 Pixel Pitch 0.3108 (H) mm x 0.3108 (V) mm Contrast Ratio(typ.) 1000:1 Optimum Resolution 1920 x 1080 @ 240 Hz Viewing Angle 178°... - Page 21 Stand Tilt -5 / +20 degree Swivel -45 / +45 degree Height adjustment 130 mm Pivot -90 / +90 degree Power (27M1N5200P) AC Input Voltage AC Input Voltage AC Input Voltage Consumption at 100VAC , at 115VAC , at 230VAC, 50Hz 60Hz 60Hz Normal Operation...
- Page 22 100% PVC BFR free housing Cabinet Color Black Finish Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. SmartUniformity and Delta E information sheets are included in the box.
-
Page 23: Resolution & Preset Modes
For best output performance, please 1920 x 1080 @ 60 Hz always ensure that your graphic card is capable of achieving the maximum H. freq Resolution V. freq (Hz) resolution and refresh rate of this Philips (kHz) display. 31.469 640x480 59.94 640x480 66.667... -
Page 24: Power Management 22
8. Power Management The following setup is used to measure power consumption on this monitor. If you have VESA DPM compliance display • Native resolution: 1920 x 1080 card or software installed in your PC, the • Contrast: 50% monitor can automatically reduce its •... -
Page 25: Customer Care And Warranty 23
Pixel Defect Policy pixels of other colors. Philips strives to deliver the highest Types of Pixel Defects quality products. We use some of the Pixel and sub pixel defects appear on the industry's most advanced manufacturing screen in different ways. - Page 26 Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel).
- Page 27 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
-
Page 28: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 29: Troubleshooting & Faqs 27
The Auto Function is not applicable in be corrected by a user. If the problem DVI-Digital mode as it is not necessary. still persists after you have tried these solutions, contact Philips customer service Visible signs of smoke or sparks representative. •... -
Page 30: General Faqs
Regulation & imaging" or "ghost imaging", on your Service Information Manual and contact screen. "Burn-in", "after-imaging", Philips customer service representative. or "ghost imaging" is a well- * Functionality different according to known phenomenon in LCD panel display. - Page 31 Shut down your computer, monitor, make sure that there is disconnect your old monitor and no pressure or force applied to the reconnect your Philips LCD monitor. panel surface side. This may affect your warranty conditions. • Turn on your monitor and then turn on your PC.
- Page 32 The any PC, workstation or Mac? damage mentioned above is not covered under your warranty. Ans.: Yes. All Philips LCD monitors are fully compatible with standard Q12: Why is my Display not showing PCs, Macs and workstations. You...
- Page 33 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the EVNIA 27M1N5200P and is the answer not in the manual?
Questions and answers