Table of Contents
Advertisement
5.6.13 Smart Tracking
Track targets manually or automatically. This function is only available on the multi-sensor
panoramic camera + PTZ camera.
Background Information
Make sure that the linked tracking function has been enabled.
Procedure
Right-click the live video, and then select Smart Tracking.
Step 1
Step 2
Select the tracking method.
● Manual positioning: Click a spot or select a zone on the bullet camera video, and then
the PTZ camera will automatically rotates there and zoom in.
● Manual tracking: Click or select a target on the bullet camera video, and then the PTZ
camera automatically rotates and tracks it.
● Automatic tracking: The tracking action is automatically triggered by tripwire or
intrusion alarms according to the pre-defined rules.
5.7 Camera
5.7.1 Initializing Remote Devices
Background Information
You can change the login password and IP address of a remote device when you initialize it.
● When you connect a camera to the NVR via PoE port, NVR automatically initializes the camera.
The camera adopts NVR current password and email information by default.
● When you connect a camera to the NVR via PoE port after NVR is upgraded to the new version,
the NVR might fail to initialize the camera. You need to initialize the camera manually.
Procedure
Step 1
Log in to the local system of the Device.
Step 2
Right-click the live page and then select Main Menu > CAMERA > Camera List > Camera
List.
Step 3
Click Uninitialized, and then click Search Device.
The Device displays cameras to be initialized.
Step 4
Select a camera to be initialized and then click Initialize.
149
User's Manual
Advertisement
Table of Contents
