Inhwaddr_Telegram - Siemens SIMOCRANE Operating Instructions Manual

Block interface
5.1 Inputs
Figure 5-8
Figure 5-9
You can also find the system constants on the following tab:
Figure 5-10
Table 5-41
Input
inHWAddr_Head
5.1.21

inHWAddr_Telegram

"inHWAddr_Telegram" inputs are of the type "HW_SubModule". The system constants of the
SINAMICS DCP telegrams must be entered here. If you are using the example application, these
addresses are already correctly preconfigured (see figure below). SIMOCRANE ESSM
automatically establishes communication with the power converters via this telegram
interface. You can find the telegram structure that SIMOCRANE ESSM expects from the power
converters in the section Controlling the power converters (Page 88).
Figure 5-11
Figure 5-12
54
HWAddr_Head_2
HWAddr_Head_3
System constants tab
inHWAddr_Head
Data type
Array [1..8] of HW_DEVICE
HWAddr_Telegram_1
HWAddr_Telegram_2
Comment
System constant for the hard‐
ware head station
SIMOCRANE Energy Storage System Management V01.01
Operating Instructions, 04/2023, A5E51573536B AE