Replacing The External Optical Drive (For 10G8, 10G9, 10Ga, 10Gb, 10Gc, 10Gd, 10Ge, And 10Gf) - Lenovo 10KG Hardware Maintenance Manual

5. Slide the computer into the new VESA mount bracket.
Figure 18. Installing the VESA mount bracket
6. Install the two screws to secure the VESA mount bracket to the computer.
Figure 19. Installing the VESA mount bracket screws
7. If the power adapter bracket is available, install the power adapter bracket. See "Replacing the power
adapter bracket" on page 110.
Replacing the external optical drive (for 10G8, 10G9, 10GA, 10GB, 10GC,
10GD, 10GE, and 10GF)
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
To replace the external optical drive, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
.
Chapter 9 Installing or replacing hardware
97