Replacing The Internal Speaker - Lenovo 10KG Hardware Maintenance Manual

Replacing the internal speaker

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
To replace the internal speaker, do the following:
1. Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
2. Remove the computer cover. See "Removing the computer cover" on page 112.
3. Disconnect the internal speaker cable from the internal speaker connector on the system board. See
"Parts on the system board" on page 37.
4. Press the tab 1 that secures the internal speaker as shown, and then lift the internal speaker out of
the internal speaker holder.
Figure 48. Removing the internal speaker (for 10G8, 10G9, 10GA, 10GB, 10GC, 10GD, 10GE, and 10GF)
Figure 49. Removing the internal speaker (for 10KG, 10KH, 10KJ, and 10KK)
120
ThinkCentre M600 Hardware Maintenance Manual