Table of Contents
Advertisement
3. Align the rear of the computer with the rear of the new vertical stand and position the computer on
the vertical stand as shown.
Figure 15. Installing the vertical stand
Replacing the VESA mount bracket
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
Note: If your computer comes with a VESA mount bracket, do not install a dust shield.
To replace the VESA mount bracket, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. If the power adapter bracket is available, remove the power adapter bracket. See "Replacing the
power adapter bracket" on page 110.
.
Chapter 9
Installing or replacing hardware
95
Advertisement
Table of Contents
