Replacing The External Optical Drive (For 10G8, 10G9, 10Ga, 10Gb, 10Gc, 10Gd, 10Ge, And 10Gf) - Lenovo ThinkCentre M600 User Manual

5. Slide the computer into the new VESA mount bracket.
Figure 16. Installing the VESA mount bracket
6. Install the two screws to secure the VESA mount bracket to the computer.
Figure 17. Installing the VESA mount bracket screws
7. If the power adapter bracket is available, install the power adapter bracket. See "Replacing the power
adapter bracket" on page 74.
Replacing the external optical drive (for 10G8, 10G9, 10GA, 10GB, 10GC,
10GD, 10GE, and 10GF)
Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page iii.
To replace the external optical drive, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
.
Chapter 7 Installing or replacing hardware
61