Table of Contents
Advertisement
Use the instructions shipped with the option to help you make the connection and install any software
or device drivers that are required for the option.
Replacing the power adapter
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
To replace the power adapter, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. If the power adapter bracket is available, remove the power adapter bracket. See "Replacing the
power adapter bracket" on page 110.
3. Disconnect the power adapter from the computer.
Figure 12. Removing the power adapter
92
ThinkCentre M600 Hardware Maintenance Manual
Advertisement
Table of Contents
