5. Slide the Seat (23) to the front of the Rail (2).
Next, attach a Stop (32) to each side of the Rail
(2) with an M4 x 19mm Screw (69).
Then, attach the Rail Cap (38) to the Rail (2)
with two M4 x 19mm Screws (69).
6. While a second person holds the Upright (77)
near the Frame (1), connect the Neck Wire (112)
to the Main Wire (84).
Tip: Avoid pinching the wires. Attach
the Upright (77) to the Frame (1) with four
M8 x 35mm Screws (82); start all the Screws,
and then tighten them.
5
69
32
69
69
38
6
Avoid
pinching
the wires
8
23
2
32
69
82
77
112
1
84