Renkforce 2203406 Operating Instructions Manual page 64

Setting function "RECORD SAVE INTERVAL"
After starting setting mode (keep the "SET" (5) button pushed for 2 seconds), the setting function "TIME SETTING"
will appear.
Then push the " " (3) button briefly repeatedly until the setting function "RECORD SAVE INTERVAL" is displayed.
Then briefly push the button "
Use the " " (1) or "
The shorter the recording duration is set, the faster will the internal memory fill and the more often will you
have to read the values on the computer.
Setting function "RAIN SEASON SETTING"
After starting setting mode (keep the "SET" (5) button pushed for 2 seconds), the setting function "TIME SETTING"
will appear.
" (3) button briefly repeatedly until the setting function "RAIN SEASON SETTING" is displayed.
Then push the "
Then briefly push the button "
Use the " " (1) or "
Setting function "BAROMETRIC SETTING"
After starting setting mode (keep the "SET" (5) button pushed for 2 seconds), the setting function "TIME SETTING"
will appear.
" (3) briefly repeatedly until the setting function "BAROMETRIC SETTING" is displayed.
Then push the "
Use the " " (4) button to select the desired subfunction:
• "CURRENT WEATHER": Current weather
Use the " " (1) or "
symbols in the display of the base station.
• "BAROMETRIC PRE-SET": Step width for bar chart display
Use the " " (1) or "
bar of the bar chart display will correspond to the barometric pressure change of 2 hPa.
• "BAROMETRIC PRE-STORM": Barometric pressure change for storm recognition
" (1) or "
Use the "
recognise a storm. If, for example, "7" is set, an air pressure change of 7 hPa within one hour will lead to storm
recognition.
• "BAROMETRIC COORDINATES": Time selection for bar chart display
Use the " " (1) or "
Setting function "CONTRAST SETTING"
After starting setting mode (keep the "SET" (5) button pushed for 2 seconds), the setting function "TIME SETTING"
will appear.
Then push the " " (3) briefly repeatedly until the setting function "CONTRAST SETTING" is displayed.
Then briefly push the button "
Use the " " (1) or "
64
" (4).
" (2) buttons to select the desired recording interval for the measured values.
" (4).
" (2) button to choose the start of the month as of which the total rain volume will be deleted.
" (2) buttons to set the current weather. This increases accuracy of the weather forecast
" (2) buttons to set the step width for the bar chart display. For example, if you set "2", each
" (2) buttons to set a value as of which barometric pressure change the base station will
" (2) buttons to set the duration for the bar chart display (the last 12 or 24 hours).
" (4).
" (2) buttons to set the contrast for the LC display.