3-12
INSTALLING END SPLASHGUARD
(Detail below for cases with elevated case
heights .)
1 . End splashguard must be slid in from the
front, so that it fits behind the end panel .
Attach end splashguard brackets (2) to base at
locations shown in the illustrations below .
2 . Align forward edge of splashguard end
panel to the inside of front splashguard .
Fasten end splashguard to bracket with
screws .
End Splashguard Panel fits to the
inside of End Assembly.
(End Assembly)
(END ASSEMBLY)
Align back edge of
ALIGN BACK
Splashguard with
EDGE OF
SPLASHGUARD
back edge of end
WITH BACK EDGE
OF
assembly
END ASSEMBLY
Bolt 5/8 inch - 18
SCREW SM 8 18X5/8 PHIL
HX HD QTY 4
(Quantity 4)
#8 Screw x TR HD
SCREW #8X1/2 TR HD PH
BLK QTY 2
(Quantity 2)
Splashguard End Panel
P/N 0535974 _R
_D
Install end splashguard before
installing front splashguards.
Bracket End
BRACKET E
ND
Splashguard
SPLASHGUA
RD QTY 2
(Quantity 2)
BUTTON PLUG
Button Plug
D
SPLASHGUARD
END QTY 1
U.S. & Canada 1-800-922-1919 • Mexico 01-800-890-2900 • www.hussmann.com
Splashguard
- End
Place Splashguard - End to the
inside of Splashguard - Front
Splashguard Front
(SPLASHGUARD FRONT)
Loosen End Assembly Bolt
LOOSEN END ASSEMBLY BOLT
SLIDE SPLASHGUARD FROM FRONT
Slide Splashguard from Front to Back
TO BACK, BETWEEN END AND CASE
between End and Case
Splashguard Panel
Splashguard Front
0 0 5 5 3 3 6 6 3 3 9 9 8 8 _ _ D D
Splashguard Panel
(PANEL SPLASHGUARD CL/O)