ENGLISH
(Original instructions)
Sleep Mode
♦
In sleep mode, unit will operate at a low speed in
Cooling Mode and the temperature display will
increase by 1 degree per hour from the selected
temperature. The unit will continue until the
ambient room temperature is reached. At this
point the unit will change to fan mode only.
♦
To select Sleep mode, press the corresponding
button on the unit's control panel, the remote
control or the 'BLACK+DECKER Home' app.
♦
Press the Sleep button again while the unit is in
sleep mode to turn this function off. The unit will
resume operation and default to the latest pre-set
mode and speed settings.
Note! On the remote control's LED display, the Sleep
mode indicator appears on the bottom right-hand
corner.
Note! Sleep mode is only available when the unit is
operating in Cooling mode.
The Timer Function
This unit is equipped with a 24-hour programmable
timer.
14
Setting the Timer
♦
Press the Timer button on the remote control, the
appliance's control panel or the 'BLACK+DECKER
Home' app to activate the timer. The number '00'
will appear on the unit's LED displays to indicate
the timer function has been selected.
♦
Once this function has been activated, press the
Up or Down buttons on the remote control or
the appliance's control panel or tap the required
operation time in the drop-down menu on the
'BLACK+DECKER Home' app to select your
desired operation time in increments of 1 hour,
from 1 to 24 hours. The current timer length will be
displayed on the remote control's LED display, the
unit's front LED display and the LED display on
the unit's control panel.