Table of Contents
Advertisement
Pre-Setting the Timer
♦
The unit's timer can also be pre-set and used as
a delay timer, so that the unit will begin operation
after a set period of time.
♦
To pre-set a delay time, press the Timer button
while the unit is plugged into the mains, but not
in operation. The number '00' will appear on the
unit's LED display to indicate the pre-set delay
timer function has been selected.
♦
Once this function has been activated, press the
Up or Down buttons on the remote control, the
appliance's control panel or the 'BLACK+DECKER
Home' app select your desired operation time
in increments of 1 hour, from 1 to 24 hours. The
current timer length will be displayed on the
remote control's LED display, the unit's front LED
display and the LED display on the unit's control
panel.
Note! To cancel a pre-set delay timer, press the
Power On/Off button to turn the unit on, then press
the button again to turn it off. This will cancel any
previously set delay timers. Alternatively, simply
press the Down button until the unit's LED display
shows '00'.
Swing
♦
This fan is equipped with a swing function.
♦
Press the Swing button on the remote control,
the unit's control panel or the 'BLACK+DECKER
Home' app to turn the swing function on and off.
The fan's top louver will automatically begin to
open and close. The corresponding indicator will
light up on the unit's control panel and the remote
control's LED display to show the swing function
has been turned on.
(Original instructions)
♦
Press this button again while the unit is swinging
to turn this function off. The top louvers will stop
automatically opening and closing and become
locked at their latest angle, and the corresponding
indicator will go out on the unit's control panel
and the remote control's LED display to show the
swing function has been turned off.
ENGLISH
15
Advertisement
Table of Contents
