Table of Contents
Advertisement
Note! The temperature selection function is only
available in Cooling mode.
Note! Once the digit display has been pressed on
the 'BLACK+DECKER Home' app, a drop-down
menu will appear, where the selection can be made.
Refer to the image above for guidance on how to
select between Celsius and Fahrenheit when using
the app.
Note! The unit's temperature will increase or
decrease by increments of 1 degree, from 16 to
32 o C, or from 61 to 90 o F.
Selecting Functions
♦
Press the Mode button on the appliance's control
panel, either of the three mode buttons on the
appliance's remote control or the Mode button on
'BLACK+DECKER Home' app to switch between
the Cooling, Dehumidifying (Dry) and Fan modes.
The corresponding indicators will light up on the
unit's control panel, the front LED display and the
remote control LED display to show which mode
is selected.
Note! When the unit is in Fan or Dehumidifying
(Dry) mode, temperature levels cannot be manually
controlled or changed.
Note! When first turned on, the unit will automatically
start on Cooling mode.
(Original instructions)
♦
The corresponding indicators will light up to show
which mode the unit is operating in. When Fan
mode is selected, a further indicator will light up
on the left side of the unit's front LED display.
♦
The four modes operate as follows:
>
Cooling Mode (Cool) - In Cooling mode, the
unit will blow out cold air to decrease the ambient
temperature. To select Cooling mode, press the
'Mode' button repeatedly until the corresponding
indicator lights up. To access this mode on the
'BLACK+DECKER Home' app press the Mode
button as detailed above, then choose the Cold
option from the drop-down menu shown above.
>
Fan Mode - In fan mode, the unit will blow
out natural air to cool the ambient temperature.
To select fan mode, press the 'Mode' button
repeatedly until the corresponding indicator lights
up. To access this mode on the 'BLACK+DECKER
Home' app press the Mode button as detailed
above, then choose the Fan option from the drop-
down menu shown on the previous page.
>
Dehumidifying Mode (Dry) - This unit
is equipped with a dehumidifying function,
which removes moisture from the air. To select
dehumidifying mode, press the 'Mode' button
repeatedly until the corresponding indicator lights
up. To access this mode on the 'BLACK+DECKER
Home' app press the Mode button as detailed
above, then choose the Dry option from the drop-
down menu shown on the previous page.
ENGLISH
13
Advertisement
Table of Contents
