Table of Contents
Advertisement
Downloading The App
♦
To start using the 'BLACK+DECKER Home' app,
begin by downloading it from the Apple App store
or the Google Play store. Scan the QR Codes
shown below to download the app directly from
either store.
♦
Follow the instructions in the app to create an
account and connect the air cooler to a WiFi
network.
Note! Other app and device instructions are also
available in the app.
Using the App
Once the app is downloaded, carry out the following
steps to control the unit remotely through the
corresponding smart device.
Connecting the App to the Unit
♦
Install the "BLACK+DECKER Home" app and
create a user account, as detailed above.
♦
Plug the appliance in. The WiFi indicator will
illuminate and begin to flash to show the unit is in
pairing mode.
♦
Place the appliance at a distance of about 5
meters to your router.
♦
As long as the power is turned on, the WIFI
indicator flashes. If there is no network
configuration after 3 minutes, the status will be
cancelled and the indicator light will go out. If
you need to re-connect to WIFI, long press the
Timer button for 5 seconds to start the network
configuration. The WIFI indicator flashes again.
WIFI Connection
The unit can be connected to WiFi in two different
ways.
Method 1
Bluetooth Connection
♦
Activate the Bluetooth function in the
corresponding smart device.
♦
When the WIFI indicator flashes, open the
'BLACK+DECKER Home' app. The unit will
automatically connect to the device via Bluetooth.
(Original instructions)
Method 2
♦
When the WIFI indicator flashes, select 'Add
Device'-' Home Appliances'-'Portable AC' on the
'BLACK+DECKER Home' app, and follow the
instructions on the display.
♦
Check the status of the WIFI indicator and choose
the correct status from the options below:
>
If the WIFI indicator flashes rapidly, the unit can
be connected to Bluetooth directly.
>
If the WIFI indicator flashes slowly, press
'Connect' to connect to the WIFI network
named 'BLACK+DECKER Home'.
Turning Your Appliance On or Off
♦
To begin using the appliance, start by plugging it
into the mains. The Power On/Off button and WiFi
icon on the unit's control panel will light up to show
the unit has been plugged in.
♦
Once the unit has been plugged in, press the
Power On/Off button on the remote control, the
appliance's control panel or the 'BLACK+DECKER
Home' app to turn it on. The front and top LED
displays on the unit's control panel will come on
and air will start emitting from the vents to show
the unit has been turned on.
♦
Press the button again to put the appliance on
Standby. Both LED displays and all indicators on
the unit's control panel aside from the Power On/
Off button and WiFi indicator will go out and air
will stop emitting from the vents to show the unit
has been put on Standby.
ENGLISH
11
Advertisement
Table of Contents
