Black & Decker BXAC40018GB Original Instructions Manual page 10

ENGLISH (Original instructions)
Installing the Sash Window Kit
To install the sash window kit, carry out the following
steps:
♦
Start by assembling the window kit, as shown in
the illustration below.
♦
Once the window kit is assembled, place it at the
desired length and tighten the provided screw to
fix it at that length.
♦
When the window kit is at the desired length,
slot the hose adaptor through it, as shown in the
illustration below.
A
A
B B
♦
Fit the sash window kit into the window recess
♦
Connect the hose adapter to the air conditioner.
♦
The unit is now ready for normal use.
10
Mounting the Window Hose
♦
To mount the window hose, begin by attaching the
window adaptor to the end of the hose, as shown
in the illustration below.
♦
Once the adaptor has been connected to the
hose, clip the hose adaptor to the back of the air
cooling unit, then attach the hose to it. Take care
to avoid any bends or kinks, as this could cause
the pipe to clog, resulting in overheating and
potential malfunction. Refer to the illustrations
below for guidelines on how to correctly install the
hose.
Note! Although the hose may be extended up to
a total length of 30cm, we recommend its length
be kept as short as possible to ensure optimal
performance.
Note! Use ONLY the hose provided with your air
cooling unit. Attempting to attach other hoses
to it to extend the length could result in the unit
malfunctioning.
Using the B&D Home App
This unit is equipped with a wireless functionality,
and fully compatible with the B&D Home smartphone
app, available for Android and iPhone.
To control this unit using the B&D Home app, carry
out the steps detailed below.