Temperature Selection; Selecting Functions - Black & Decker BXAC40008GB Manual

ENGLISH (Original instructions)
Note! Although the hose may be extended up to
a total length of 30cm, we recommend its length
be kept as short as possible to ensure optimal
performance.
Note! Use ONLY the hose provided with your air
cooling unit. Attempting to attach other hoses
to it to extend the length could result in the unit
malfunctioning.
Installing the Carbon Filter
♦
To install the carbon filter, first remove its frame
from the unit, as shown in the picture above.
♦
Once the frame has been removed, take the
active carbon filter out of its plastic bag and insert
it into the back of the unit.
♦
When you have installed the filter, refit the filter
frame inside the unit.
Turning Your Appliance On or Off
♦
Press the Power On/Off button on the remote
control or on the appliance's control panel to turn
it on. The LED display on the unit's control panel
will come on and air will start emitting from the
vents to show the unit has been turned on.
♦
Press the button again to turn the appliance off.
The LED display on the unit's control panel will
go out and air will stop emitting from the vents to
show the unit has been turned off.
Speed Selection
♦
Press the Speed button on the remote control
or on the appliance's control panel to choose
between High, Medium and Low speed settings.
The corresponding indicator will light up on
the unit's body to show which speed has been
selected.
10
Controlling the Air Flow
♦
This unit allows for manual control of the air flow
through the positioning of the inner and outer
louvers at the front of the unit.
♦
To position the outer louvers, gently hold them by
the lip and push them upwards or downwards as
required. Push the louvers upwards to open them,
or downwards to close them.
♦
To position the inner louvers, gently hold them
by the lip and push them sideways to the left or
right as required. The air flow will be re-directed
accordingly.

Temperature Selection

♦
While the unit automatically adjusts its selected
mode to reflect room temperature, temperature
outputs can also be manually controlled if
required.
♦
Press the Up and Down buttons on the remote
control or the + and – buttons on the unit's control
panel to manually adjust temperature levels. Press
the Up or + buttons to increase the temperature,
or press the Down or – buttons to decrease it.
Note! The unit's temperature will increase or
decrease by increments of 1, from 18 to 32 degrees.

Selecting Functions

♦
Press the Mode button on the remote control or
on the appliance's control panel to switch between
the Auto, Cooling, Fan and Dehumidifying modes.
To select a different function, press the button
again as many times as required until you have
reached your preferred function.
♦
Automatic Mode - Automatic mode is the unit's
default working mode. In this mode, the unit will
automatically detect ambient temperature in the
room and select the appropriate function. If the
ambient temperature is above 23 degrees, the
unit will automatically start in cooling mode; if
the temperature is 23 degrees or below, it will
automatically start in ventilation mode.
The corresponding indicators will light up to show
which mode the unit is operating in. For cooling
mode, the Auto and Cooling indicators will light up;
for ventilation mode, the Auto and Fan indicator
will light up.