Plextor PX-712 Installation And User Manual page 81

Section 5. Advanced Features and PlexTools Professional
Figure 35: Changing preferences for graphing C1/C2 errors
4. Click OK to exit the Preferences window and return to the Q-Check
C1/C2 Test window.
5. To begin measurement, in the C1/C2 Test window, click the Start
button. You see the error counts representing the result of C1 error
measurement (BLER) and C2 error measurement (E22). If the disc is
defective, you may also see a trace for CU error. The test halts if a
CU error is detected.
6. To end measurement, click the Stop button, or wait for the
measurement to stop by itself. Your window shows the test results,
and a graph of the error counts recorded by the application.
PX-712 Installation and Users Manual
71