Section 2. Installing the PX-712A Internal ATAPI Drive
Audio Connection
Required
MPC audio source
MPC-
compliant
audio cable
Sound Blaster or
Sound
compatible sound
Blaster-
board
compatible
analog audio
cable
Digital audio output
Cable that's
compatible
with SPDIF
or Digital-In.
Cable
How to Connect It
Connect to MPC audio
source, and to analog audio
output connector at the rear
of the Plextor drive.
Connect to Sound Blaster-
compatible audio board and
to analog audio output
connector at the rear of the
Plextor drive.
Connect to SPDIF or Digital-
In connector on sound
board (if sound board
supports digital audio) and
to digital audio output
connector at the rear of the
Plextor drive.
PX-712 Installation and Users Manual
33