Plextor PX-320A User Manual page 65

Performance Specifications (continued)
Error Rate CD-ROM Mode 1: 1 Block/10
CD-ROM Mode 2: 1 Block/10
Data Buffer 2 MB
Spindle Motor Brushless
Front Panel
Eject Eject Button; Manual Emergency Eject; Software Eject
DISC Indicator LED Green: CD-ROM loaded
Yellow: DVD loaded
BUSY Indicator LED Green: Disc load
Yellow: Reading disc
Amber: Writing data to disc
Green during writing: BURN-Proof is active
BUSY Indicator Blink 50 ms interval, 20X (R) Z-CLV; 10X (RW)
Interval and Write 100 ms interval, 16X (R) Z-CLV; 4X (RW)
Speed 150 ms interval, 1-16X (R) CLV
Disc Loading Auto
Headphone Jack Stereo mini-jack, 0.8V +/- 0.3V at 32 ohms
Headphone Volume Wheel knob
Control
Rear Panel
Power Supply DC +5V: Typically 800 mA during writing, 900 mA during
reading. Peak 1.1 A.
DC +12V: Average 1 A during writing, 900 mA during
reading. Peak 2.0 A.
Interface Connector IDE bus, 40-pin flat ribbon type. Interface complies with
ATA/ATAPI-5. Maximum total cable length must be less
than 18 in (45.7 cm).
Analog Audio Output Stereo analog output, Molex connector (L*G*G*R),
MPC3 standard
Digital Audio Output Digital audio output for input to SPDIF or Digital-In input
Mode Jumper Master (default), Slave, Cable Select
DMA Jumper No jumper: Ultra DMA Mode 0-2 (default)
Jumper installed: DMA Mode 0-2
Appendix A: PlexCombo Specifications
12
Bits
9
Bits
PlexCombo 20/10/40-12A Installation and Users Manual
59