Troubleshooting; Emergency Eject - Plextor PX-504UF Installation And User Manual

Section 4. Maintenance and Troubleshooting

Troubleshooting

If you have problems during or right after installation of your drive, visit
the Plextor web site to find tips to help find the problem.

Emergency Eject

If the automatic eject button at the front of the drive does not work, use
this procedure to open the drive.
To use the emergency eject hole to open the drive:
1. Set the POWER switch at the rear of the PX-504UF drive to OFF.
2. At the front of the PX-504UF drive, insert the emergency eject tool,
or a paper clip or other thin, rigid object, into the emergency eject
hole.
3. Push the tool or other object straight in, until the disc tray clicks
open.
4. Carefully continue to slide the disc tray open.
5. Remove the CD from the disc tray.
6. Carefully push the disc tray shut.
30
Plextor PX-504UF Installation and Users Manual