Installing Your Px-504Uf - Plextor PX-504UF Installation And User Manual

2. Installing Your PX-504UF

This chapter explains how to physically connect the PX-504UF to your
computer. In general, this is what you'll do:
1. Determine what operating system your computer is running:
If your computer is running the Windows XP, 2000 or Me, or
the Macintosh operating system, you can install right away.
If you have Windows 98SE, and you are using the FireWire
(IEEE 1394) interface, you'll need to go to the Microsoft
Windows web site to bring your system up to date.
If you have Windows 98SE, and you are using USB, you'll need
to install a set of Plextor-provided drivers to bring your system
up to date.
2. Determine which interface you want to use: FireWire (IEEE 1394)
or USB.
3. Set the PX-504UF interface switch for IEEE 1394 or USB.
4. Connect the AC adapter to an electrical outlet and to the PX-504UF.
5. Turn the drive's POWER switch ON (the "1" position).
6. Connect the USB or FireWire cable from your PX-504UF drive to
the computer.
That's all there is to it! We'll go over the procedure in more detail in the
next few pages.
If you have a PC, start here. If you have a Macintosh, go to "If You
Have a Macintosh" on page 21.
Plextor PX-504UF Installation and Users Manual
13