Cabling Connections; Component Assembly - Plantronics A20 User Manual

PL-104 A20 yellow 12/12/01
STEP 1
SETUP
Take all the Telephone Headset Amplifier components out of the
box and place on a clean surface near the telephone to be
converted.

CABLING CONNECTIONS

Arrange components as shown in the lower diagram on page ii.
Make all the connections as shown.
Remove the handset cord from the telephone and plug it into
the Handset Jack
Connect one end of the Short Cable
Line Jack .
20
Connect the AC Power Adapter
Jack and a wall outlet.
18

COMPONENT ASSEMBLY

The Telephone Headset Amplifier
connected by snapping in the two plastic dovetail connecting
arms on the Amplifier into the top of the spring loaded slots on
the front of the Accessory Deck.
With the Accessory Deck Cover removed, organize all related
cabling by pressing the cables into the molded guides.
Replace the Accessory Deck Cover and place the telephone on
the Deck.
Connect the other end of the Short Cable
handset line jack.
Push the Headset Holder
7:42 PM Page 7
.
16
to the A20 Telephone
11
to the AC Power Adapter
14
and Accessory Deck
21
to your telephone's
11
into one of the positions shown.
17
4
are
13
D
G
G