Using The Headset; Placing A Call; Receiving A Call - Plantronics T10 User Manual

T10 Final w_warranty 4/20/00
STEP 2

USING THE HEADSET

The Headset included with the T10 Headset Telephone
can be used with the Adjustable Headband or with one of the
Ear Hooks.
HEADBAND USE
Snap the Adjustable Headband
Assembly . Press the Ear Cushion Assembly
21
Assembly , aligning the notch in the ring with the Voice
21
Boom.
22
Place the Headset on either ear and adjust the Headset to a
comfortable position by moving the Adjustable Headband.
Position the Voice Boom near the corner of your mouth.
22
EAR HOOK USE
Press the Pivot Ball Ring onto the Headset Assembly.
24
Insert one of the Ear Hooks
23
need to try each size to find the most comfortable fit. Slip the
hook over your ear and position the Voice Boom near the corner
of your mouth.
CLOTHING CLIP
The Clothing Clip keeps the Headset free from the weight of the
19
cord. Attach the clip to your clothing at about chest level. Allow
enough slack in the cord (approximately 6 inches) to permit your
head to move without pulling on the Headset or the Clothing Clip.
You are now ready to make or receive calls.
4:09 PM Page 16
into the back of the Headset
20
onto the Headset
25
20
21
into the Pivot Ball. You may
6
STEP 3

PLACING A CALL

With the Headset in position, place a call by pressing the
On/Off Button (In-use Indicator
11
Lights are on). Listen for dial tone.
2
Dial the desired number using the Twelve Button Dial Pad.
When your party answers, speak normally. If your party cannot
A
hear you, see Troubleshooting (page 12).
Adjust the Listen Volume Control
other party.

RECEIVING A CALL

B
With the Headset in position, when the ringer notifies you of
C
an incoming call, press the On/Off Button
(In-use Indicator and On Line Indicator Lights
12
D
and On Line Indicator
12
3
as needed to hear the
13
to answer the call
11
are on).
2
7
E